runaway
Single-script MDM bypass for macOS. Works from Recovery mode on Apple Silicon and Intel.
I started this because the original bypass-mdm project had five different scripts (v2, v3, express, dualboot.sh, verify.sh), each with slightly different options and none of them handling the full problem after Migration Assistant. This replaces all of them in one file.
Quick start
- Copy the
runawayfolder to an external SSD (FAT32, APFS, or exFAT) - Boot to Recovery:
- Apple Silicon: hold the power button until you see "Loading Startup Options", then click Options → Continue
- Intel: Cmd+R at the startup chime
- Open Terminal from the Utilities menu
- Run:
chmod +x "/Volumes/YourSSD/runaway/runaway"
"/Volumes/YourSSD/runaway/runaway"
Pick "Full bypass" from the menu. Or if you know what you want:
"/Volumes/YourSSD/runaway/runaway" bypass
No internet needed. No SIP to disable. No typing long URLs.
If you do have internet in Recovery:
curl -L https://git.jskdjs.cn/ruihan/runaway/raw/branch/main/runaway-standalone.sh -o /tmp/runaway
chmod +x /tmp/runaway && /tmp/runaway bypass
Commands
bypass — Full MDM bypass (Recovery only)
./runaway bypass
Creates a temporary admin account and suppresses MDM. What it does:
- Finds and mounts the macOS Data volume
- Unlocks FileVault if needed (asks for password)
- Creates an admin user (default Apple / 1234)
- Removes DEP activation records
- Blocks 13+ Apple MDM domains plus your org's MDM host
- Disables 4 enrollment daemons
- Cleans user-level MDM artifacts from all home directories
- Sets .AppleSetupDone so Setup Assistant is skipped
suppress — Silence enrollment, no user
./runaway suppress
Same as bypass minus the user creation. Useful after a clean bypass breaks from a macOS update.
admin — Create admin user only (Recovery only)
./runaway admin
Creates a hidden local administrator account on the system without performing an MDM bypass or suppression. What it does:
- Finds and mounts the macOS Data volume
- Unlocks FileVault if needed
- Creates an admin user with a custom username and password
- Attempts FileVault integration when available; verify it after reboot
- Hides the account from the macOS login window via dscl
- Conceals the user's home directory in
/Usersusing filesystem flags
heal — Check and re-apply
sudo ./runaway heal # from booted system
./runaway heal # from Recovery
Checks if suppression is still intact. If any piece (DEP markers, hosts block, daemon disable) has been reset, it re-applies it. Safe to run repeatedly.
persist — Boot-time auto-heal
sudo ./runaway persist
Installs a LaunchDaemon at /Library/LaunchDaemons/com.runaway.heal.plist that runs runaway heal on every boot and every 24 hours after that. Logs go to /var/log/runaway-heal.log.
Use this before a macOS upgrade. When the update finishes and reboots, heal runs automatically and re-applies anything the update reset.
unpersist — Remove auto-heal
sudo ./runaway unpersist
Removes the LaunchDaemon and unloads it.
firewall — Kernel-level MDM block
sudo ./runaway firewall
Creates pf firewall rules that drop traffic to Apple's MDM IP ranges (17.0.0.0/8 and 17.128.0.0/10). pf works below DNS — DNS-over-HTTPS cannot bypass it.
Warning: this blocks all Apple services. iCloud, App Store, and system updates will not work while the firewall is active. Use whitelist instead if you need those.
firewall-off — Remove firewall
sudo ./runaway firewall-off
Flushes the Runaway pf anchor and restores pf.conf.
whitelist — Block only MDM, keep iCloud
sudo ./runaway whitelist
Alternative to firewall that resolves only the essential MDM domains (mdmenrollment.apple.com, deviceenrollment.apple.com, iprofiles.apple.com) to IPs and blocks those, leaving everything else untouched. iCloud, App Store, and updates should work normally.
harden — Live cleanup from booted system
sudo ./runaway harden
Runs from the logged-in desktop after bypass. Does:
- Kills ManagedClient, mdmclient, activationd
- Forces profile removal
- Scans and removes MDM LaunchAgents per user
- Flushes DNS cache, restarts mDNSResponder
- Checks keychain for MDM identity certs
- Looks for JAMF/Intune/Workspace ONE agents
- Disables iCloud Private Relay (a DoH loophole)
audit — Deep system scan
sudo ./runaway audit
Comprehensive scan that checks: installed profiles, enrollment state, keychain certificates, user LaunchAgents, system LaunchDaemons, running processes, MDM agent binaries, pf firewall status. Ends with a risk score (LOW / MEDIUM / HIGH / CRITICAL).
status — MDM health check (Recovery only)
./runaway status
Shows DEP markers, hosts block, daemon overrides, profile enrollment, and backup status. Only works from Recovery because that's where the Data volume is cleanly accessible.
check — Pre-format / pre-upgrade assessment
sudo ./runaway check
Answers: "If I wipe this Mac, will it lock?" Checks DEP records, profiles, enrollment state, firewall, and persistence. Also does an upgrade safety check — tells you if persist and firewall are installed before you upgrade macOS.
Returns one of two verdicts:
- SAFE TO FORMAT — no MDM enrollment detected
- MDM DETECTED — this Mac will lock after a wipe. Run bypass from Recovery afterward.
monitor — Background MDM watcher
sudo ./runaway monitor
Starts a daemon that checks MDM state every 5 minutes. If it detects MDM trying to re-enroll (DEP record appears, hosts block missing, enrollment becomes active), it auto-heals and sends a macOS notification.
sudo ./runaway monitor-stop # stop it
sudo ./runaway monitor-status # check if it's running
Logs everything to /var/log/runaway-monitor.log. The daemon does not survive a reboot on its own — combine with persist for persistence.
backup / restore — State save
./runaway backup
./runaway restore
Backup saves hosts, config profiles, and launchd override to .runaway-backup/. Restore reverts them.
dualboot — External volume target
sudo ./runaway dualboot
Same as bypass but lets you pick which volume to target (for external macOS installs or dual-boot setups). Prompts for system and data volume names.
version / help
./runaway version
./runaway help
Aliases
Every command has a shorter alias:
| Alias | Full command |
|---|---|
by |
bypass |
sv |
suppress |
st, ls |
status |
fw |
firewall |
fw-off |
firewall-off |
wl |
whitelist |
mn |
monitor |
mn-stop |
monitor-stop |
mn-st |
monitor-status |
Options
Global options that can go before any command:
| Option | Effect |
|---|---|
--verbose |
Show debug messages |
--log-file <path> |
Write log output to file |
Example:
sudo ./runaway --verbose --log-file /tmp/runaway.log heal
How it works
MDM enrollment on macOS sits on four layers. Runaway addresses each one.
Layer 1: DEP activation record
When an organization assigns a device in Apple Business Manager, macOS creates marker files at:
/private/var/db/ConfigurationProfiles/Settings/
.cloudConfigHasActivationRecord ← "this serial has DEP"
.cloudConfigRecordFound ← "enrollment was triggered"
.cloudConfigTimerCheck ← "check again later"
Runaway removes these and creates decoy files (.cloudConfigRecordNotFound, .cloudConfigProfileInstalled) that signal "no enrollment needed."
Layer 2: Network blocking
The enrollment client contacts Apple servers to download the MDM profile. Without network access, it cannot complete enrollment.
Runaway blocks via /etc/hosts:
iprofiles.apple.com— profile deliverydeviceenrollment.apple.com— DEP servicemdmenrollment.apple.com— MDM serviceacmdm.apple.com— Apple Configurator MDMaxm-adm-mdm.apple.com— ACM enrollmentalbert.apple.com— ABM device assignmentgdmf.apple.com— software update catalogxp.apple.com— device managementgs.apple.com— software updatestb.apple.com— device trustvpp.itunes.apple.com— volume purchase- Your org's MDM host (extracted from the DEP record)
Both IPv4 (0.0.0.0) and IPv6 (::) entries are added.
Some listed hosts also serve general Apple services. Blocking the software-update
hosts can affect updates; this is distinct from a Wi-Fi radio failure.
configuration.apple.com, used for Rosetta 2 updates, is no longer blocked.
See Apple's network requirements.
Layer 3: Launchd daemon override
macOS registers enrollment daemons that run at boot:
| Daemon | What it does |
|---|---|
com.apple.ManagedClient.enroll |
Main enrollment |
com.apple.ManagedClient.cloudConfiguration |
Cloud config |
com.apple.mdmclient.daemon.runatboot |
MDM client |
com.apple.activationd |
Device activation |
Runaway disables them via the launchd override at /private/var/db/com.apple.xpc.launchd/disabled.plist.
Layer 4: User-level cleanup
Home directories carry MDM artifacts that trigger re-enrollment after login:
~/Library/Preferences/com.apple.mdm.*
~/Library/Preferences/com.apple.ManagedClient.*
~/Library/Application Support/com.apple.ManagedClient*/
~/Library/LaunchAgents/com.apple.mdm.*
Runaway removes these from every home directory on the Data volume. This is the step most scripts miss — and the reason MDM comes back after Migration Assistant.
Layer 5: pf firewall (optional)
The hosts file can be bypassed by DNS-over-HTTPS or cached DNS. pf (packet filter) operates at the kernel level and is immune to both. Runaway installs pf rules that either:
- firewall: blocks Apple's entire IP range (17.0.0.0/8 + 17.128.0.0/10) — aggressive but 100% effective
- whitelist: resolves only MDM domains to IPs and blocks those specifically — keeps iCloud working
Intel vs Apple Silicon
| Intel T2 | Apple Silicon | |
|---|---|---|
| Recovery | Cmd+R at boot | Hold power button |
| System volume | Writable with SIP disabled | Cryptographically signed (SSV) — read-only |
| FileVault unlock | diskutil apfs unlockVolume | Same, but needs user password or recovery key |
| Enrollment daemons | Fewer | activationd + cloudConfig |
| NVRAM flags | Some | More firmware-level flags |
| Migration Assistant | Less risky | Carries MDM state — see below |
On Apple Silicon, all writes target the Data volume. The system volume is never modified. SIP does not need to be disabled.
Migration Assistant failure
This is the most common reason MDM comes back.
When you migrate from an Intel Mac to Apple Silicon (or between AS Macs), Migration Assistant copies:
- DEP activation records
- Enrolled configuration profiles
- User-level MDM preferences and caches
- Launch agents that re-trigger enrollment
- Keychain identity certificates
The old bypass scripts only clean system-level artifacts (DEP markers, hosts, launchd). The user-level stuff gets copied over and re-establishes enrollment on every login.
Symptoms
- Remote Management screen appears after the first reboot
- Running suppress makes it go away temporarily
- MDM profile returns within about a minute of login
Solution
From Recovery: run runaway bypass (or suppress). This cleans both system-level and user-level artifacts.
If MDM still comes back: boot normally, run sudo ./runaway harden immediately after login. This kills active MDM processes and removes profiles before they can re-establish.
For prevention: run sudo ./runaway persist and sudo ./runaway whitelist before Migration Assistant. The LaunchDaemon + pf rules survive the migration and catch anything that slips through.
Hard lock: DFU / IPSW restore
If MDM is unbreakable — even from Recovery — the device may need a full firmware restore. This applies to Apple Silicon Macs only.
You need: a second Mac with Apple Configurator 2 (free from App Store), a USB-C cable, and the correct IPSW file for your Mac model.
Steps:
- On the helper Mac, open Apple Configurator 2
- Connect the locked Mac via USB-C while holding the power button
- M1/M2: hold power 10s, keep holding while connecting USB-C
- M3/M4: hold power + volume down 10s while connecting
- The locked Mac appears as a DFU device in Configurator
- Right-click → Advanced → Restore (pick the IPSW file)
- Wait 10-30 minutes for restore to finish
- Mac reboots to Setup Assistant — do not connect to Wi-Fi
- Immediately boot to Recovery (hold power) and run
runaway bypass
This erases all data. IPSW files are available at ipsw.me.
Logging
All commands now log with timestamps and levels:
[INF] Data volume: /Volumes/Macintosh HD - Data
[ OK] Admin 'apple' created (UID 501)
[WRN] DEP activation record present
[ERR] Firewall needs sudo: sudo ./runaway firewall
[STP] Locating Data volume by APFS role...
[DBG] Checking pfctl availability
Use --verbose to see debug messages and --log-file <path> to write everything to a file.
Files
runaway/
├── runaway # Main script (entry point)
├── lib/
│ ├── colors.sh # Logging, colors, prompts
│ ├── detect.sh # Recovery detection, volume mounting
│ ├── validate.sh # Username/password validation
│ ├── dscl.sh # Directory Services (user CRUD)
│ ├── suppress.sh # DEP removal, hosts, daemon disable
│ ├── backup.sh # Backup and restore
│ ├── status.sh # Health check and audit
│ ├── heal.sh # Auto-heal + LaunchDaemon persist
│ ├── firewall.sh # pf rules management
│ ├── harden.sh # Live-OS hardening
│ ├── whitelist.sh # Selective iCloud-safe block
│ ├── check.sh # Pre-format assessment
│ └── monitor.sh # Background MDM watcher
├── README.md
├── CONTRIBUTING.md
├── CODE_OF_CONDUCT.md
├── SECURITY.md
├── CHANGELOG.md
└── LICENSE (MIT)
The standalone variant (runaway-standalone.sh) bundles everything into one file. Build it with bash examples/build-standalone.sh.
Limitations
- Your serial stays in ABM. Only the organization can remove it. If the device ever connects to the internet with all protections removed, it will re-enroll.
- A full wipe requires re-running. Clean installs clear the Data volume. Boot to Recovery and run bypass again afterward.
- macOS updates can reset daemons. Always run
persistbefore an update sohealruns automatically after. profiles statusmay show enrollment. This is cosmetic — the SSV stores profile state read-only. DEP markers and daemon disable take precedence.- The hosts file can be bypassed. DNS-over-HTTPS and cached DNS bypass
/etc/hosts. Usefirewallorwhitelistfor the kernel-level fix.
Safety
Runaway is designed to be safe:
- No SSV writes — all changes target the Data volume
- Reversible —
backupsaves state,restorereverts - No data erasure — never runs
profiles renewor erase commands - Idempotent — running multiple times is harmless
- Prompts for confirmation before destructive actions
Troubleshooting
MDM comes back after reboot
Run runaway suppress from Recovery. If it still returns, you have Migration Assistant artifacts. Run runaway harden from the booted system.
profiles shows enrollment
Cosmetic. The SSV stores profile state but the enrollment daemons are disabled. Run runaway status to check the actual state on the Data volume.
FileVault unlock fails
You need a user password or the FileVault recovery key. If neither is available, the Data volume cannot be mounted from Recovery.
"Not a macOS Data volume"
Runaway checks for /private/var/db/dslocal/nodes/Default on the mounted volume. If it's missing, you mounted the wrong disk. Run diskutil list to find the correct one.
macOS 27 and later
There are two positive community reports for macOS 27.2:
- Runaway 2.0.0 reported working on an M1 Pro after upgrading an existing Sequoia setup. This was not a fresh installation.
- Basic commands reported working on a MacBook Neo (Apple A18 Pro).
These reports do not establish support for every build, command, or Recovery/FileVault scenario. Neither includes a complete test matrix. Shell regression tests are separate from hardware validation.
Wi-Fi on an external startup disk
This scenario is under investigation. From the affected external installation, run:
./runaway doctor --network
This read-only command reports the macOS build, Wi-Fi interface, power, link, and IPv4 category without printing SSIDs, hardware addresses, or IP addresses. A failed query is reported separately from a successful query with no Wi-Fi port.
Link status: inactiveconcerns the interface link, before internet reachability.Wi-Fi IPv4: link-localindicates a 169.254 address;nonemeans no nonzero IPv4 address was reported. Neither result diagnoses IPv6 connectivity.Wi-Fi IPv4: configureddoes not prove DNS or internet access.
Include the script commit, Mac model, exact OS build, SSD/cable/hub connection, and whether Wi-Fi worked on that same external installation before running Runaway, if known. Working Wi-Fi on the internal installation alone does not isolate what changed on the external one.
The dualboot code does not directly rewrite Wi-Fi preferences or toggle the
radio. Tests preserve simulated network preferences, but do not reproduce macOS
services reacting to account, enrollment, or boot changes.
Apple documents model-specific external installations and possible USB 3/Thunderbolt 3 wireless interference. These are investigation leads, not confirmed causes. If comparing startup disk cables or hubs, shut down before changing their connections; do not unplug the active startup disk.
Monitor won't start
Check if it's already running (monitor-status). Check permissions — it needs root. Check logs at /var/log/runaway-monitor.log.
FAQ
What macOS versions are supported? The existing targets are macOS 12–15 and 26. Validation depends on the command, OS build, and hardware. macOS 27.2 has the limited community reports described above; they do not replace testing Recovery, FileVault, and networking on the target Mac.
Do I need to disable SIP? No. All writes target the Data volume.
Will this survive an OS reinstall? No. Clean install wipes the Data volume. Re-run after reinstalling.
Can the organization track this? The serial stays in ABM. If the device connects to the internet with enrollment daemons re-enabled, it will re-enroll.
What if I need iCloud?
Use whitelist instead of firewall or suppress. It blocks only MDM endpoints.
Why does MDM come back after Migration Assistant?
MA copies user-level caches, preferences, and launch agents. Runaway handles this — run bypass or suppress from Recovery after migrating.
Contributing
Run make ci with Bash, Python 3.9+, ShellCheck, and Bats (validated with Bats 1.12).
The test suite uses temporary volumes and inert macOS command fixtures; it does not validate behavior on real Mac hardware.
See CONTRIBUTING.md. PRs welcome, especially for:
- New macOS version compatibility
- Additional MDM domains or daemon labels
- Migration Assistant detection
- iCloud / MDM domain research
License
MIT.