feat: add axm-adm-mdm domain block, DFU/IPSW restore guide, T2 docs
- Add axm-adm-mdm.apple.com to domain block list (Apple Configurator MDM) - Add DFU/IPSW firmware restore procedure to troubleshooting - Add Intel T2 Mac documentation section - Update domain table in README
This commit is contained in:
@@ -186,6 +186,7 @@ The enrollment client contacts Apple and organization servers. Without network a
|
||||
| `deviceenrollment.apple.com` | DEP enrollment service |
|
||||
| `mdmenrollment.apple.com` | MDM enrollment service |
|
||||
| `acmdm.apple.com` | Apple Configurator MDM |
|
||||
| `axm-adm-mdm.apple.com` | Apple Configuration Manager enrollment |
|
||||
| `albert.apple.com` | ABM app/device assignment |
|
||||
| `gdmf.apple.com` | Mobile device management framework |
|
||||
| `configuration.apple.com` | Configuration service |
|
||||
@@ -334,6 +335,46 @@ The hosts file is weak. For durability, use a firewall:
|
||||
|
||||
Run `unleash suppress` from Recovery again. If it still returns, you likely have **user-level artifacts** from Migration Assistant. Follow the [Solution section](#solution-three-phase-approach) above.
|
||||
|
||||
### Hard-locked Mac: DFU / IPSW Restore
|
||||
|
||||
If the MDM screen is unbreakable — even from Recovery — the device may need a full firmware restore. This applies to Apple Silicon Macs only.
|
||||
|
||||
**What you need:**
|
||||
- A second Mac with Apple Configurator 2 installed (from App Store)
|
||||
- A USB-C cable (preferably Thunderbolt 4)
|
||||
- The correct IPSW file for your Mac model
|
||||
|
||||
**Steps:**
|
||||
1. On the second Mac, open Apple Configurator 2
|
||||
2. Connect the locked Mac via USB-C while holding the Power button (DFU mode)
|
||||
- M1/M2: hold Power for 10s, keep holding while connecting USB-C
|
||||
- M3/M4: hold Power + Volume Down for 10s while connecting
|
||||
3. In Apple Configurator 2, the Mac appears as a DFU device
|
||||
4. Right-click → Advanced → Restore (choose the IPSW file)
|
||||
5. Wait for restore to complete (10-30 minutes)
|
||||
6. Mac reboots to Setup Assistant — **do NOT connect to Wi-Fi**
|
||||
7. Immediately boot to Recovery (hold Power) and run `unleash bypass`
|
||||
|
||||
> ⚠️ This **erases all data** on the Mac. Only use if the normal bypass fails completely.
|
||||
|
||||
**Where to get IPSW files:**
|
||||
- [ipsw.me](https://ipsw.me) — official Apple IPSW downloads
|
||||
- [MrMacintosh blog](https://mrmacintosh.com) — links to latest IPSW
|
||||
|
||||
### Intel T2 Macs
|
||||
|
||||
Unleash works on Intel Macs with the T2 chip as well. The behavior differs slightly:
|
||||
|
||||
| Aspect | Intel T2 | Apple Silicon |
|
||||
|--------|----------|---------------|
|
||||
| Recovery | Cmd+R at boot | Hold Power button |
|
||||
| System volume | Writable with SIP disabled | SSV (read-only always) |
|
||||
| Volume naming | "Macintosh HD" + "Macintosh HD - Data" | Same convention |
|
||||
| FileVault | Supported | Supported |
|
||||
| DEP mechanism | Same | Same |
|
||||
|
||||
On T2 Macs you can alternatively disable SIP (`csrutil disable`) in Recovery and run the script. This is not needed on AS Macs since all writes target the Data volume.
|
||||
|
||||
### "profiles" command still shows enrollment
|
||||
|
||||
The `profiles` command reads from the system volume (SSV) which is read-only on Apple Silicon. This is cosmetic — if DEP markers are removed and daemons are disabled, enrollment won't activate. Run `unleash status` to check the actual Data volume state.
|
||||
|
||||
@@ -37,6 +37,7 @@ suppress_enrollment() {
|
||||
deviceenrollment.apple.com
|
||||
mdmenrollment.apple.com
|
||||
acmdm.apple.com
|
||||
axm-adm-mdm.apple.com
|
||||
albert.apple.com
|
||||
gdmf.apple.com
|
||||
ax.init-content.apple.com
|
||||
|
||||
Reference in New Issue
Block a user